This is an old revision of the document!

Bandsaw, Horizontal - Hafco BS-7DS

Aliases -
Other References

Asset Register

Xero Asset

Portal

Metalworking Forum

Official Maintainer Dave Seff

Current Status

Working

Machine is working as expected.

Usage

This machine requires induction to use.

Book an induction in Eventbrite.
https://www.eventbrite.com/d/australia--south-brisbane/hsbne-inc-bandsaw/?page=1

Personal Protective Equipment

Required Always wear AS/NZS 1337.1 compliant safety glasses while operating this machine.
Required Enclosed shoes are required, no open sandals, thongs etc
Required Restrain hair while operating machine
Prohibited Loose clothing and jewellery not to be worn while operating this machine.
Recommended We recommend hearing protection.
Warning Entanglement hazard present while wearing gloves.
Maintenance Disconnect power to the machine before performing maintenance, including wheel changes

Machine Specifications

Name Value
Motor Power 750W 240V
Blade Size 2362x19x0.8
Rectangular Capacity @ 90° 215mm X 178mm
Rectangular Capacity @ 45° 140mm x 85mm
Blade Speeds 24, 41, 61, 82mpm
Mitre Angle Limits -45°, +45°
Weight 165kg

Documents

Manual

Blade Adjustment Guide

Supplier

Known Issues

Date Description Workaround Proposed Remediation

Modifications / Repair History

Date Modified By Description Remediation Cost
17/11/2020 Eris Ryan Fletcher Barnes had breaker tripping Tested fine. 10M Ohm to earth. Put back into service. $0
08/12/2020 Eris Ryan Blade not moving Blade had come loose, reattached and tightened $0
08/12/2020 Ryan Marple All bandsaw blades dull Purchased 2 new bi-metal blades $110
08/12/2020 Ryan Marple Fasteners holding cover require different tools to open Replaced fasteners with wing screws $20

Accessories

Image Category Accessory Name & Notes Location Buy from

Consumables & Running Costs

Image Category Accessory Name & Notes Location Buy from
penritesolubleoil.jpg Coolant Penrite Soluble Oil
Mixed with water to create cutting fluid. 		Stored in metal shop chemical cabinet Penrite Soluble Oil 20L Drum
Blade 2362 x 19 x 0.80mm Bandsaw Blade
Bi-metal blades are preferred due to their longer lifespan than regular blades. The preferred blade is bi-metal 6-10TPI. 		Hung above metal shop chemical cabinet 6-10TPI Bi-Metal Blade (Preferred)
4-6TPI Bi-Metal Blade
10-14TPI Bi-Metal Blade
6TPI Carbon Steel
8TPI Carbon Steel
10TPI Carbon Steel
14TPI Carbon Steel

Maintenance

Interval Task
Daily Top up coolant tank with tap water
Weekly Oil vice lead screw and machined surfaces

RACI

Task / Action Executive Cause Leader
Cause Team 		Named Maintainer Trainers Cause Membership Implementer
Modification and Repairs - AC C I I I R
Induction changes C RACI RC I I I R
Daily Maintenance - - I - - - R
Weekly Maintenance - - RAI - - - R
Changing Blade - - - - - - R
Setting cut angle - - - - - - R

Risk Matrix and Mitigation

Ref / ID Pre-Mitigation Mitigations / Warnings / Remedies Post Mitigation
Risk Risk Severity Risk Likelyhood Risk Level Risk Severity Risk Likelyhood Risk Level Acceptable to Proceed
0001 Projectile Intolerable Probable 12 Induction required.
Require use of appropriate PPE. 		Low Possible 2 Yes
0002 Entanglement Intolerable Probable 12 Induction required.
Discourage glove use during operation.
Prohibit long hair & jewellery. 		Low Possible 2 Yes
0003 Laceration/Dismemberment Intolerable Possible 11 Induction required.
Require use of appropriate PPE. 		Low Improbable 1 Yes
0004 Heat burn from workpiece Undesirable Possible 8 Induction required.
Always ensure coolant is working properly.
Feel workpiece temperature before grabbing it. 		Low Improbable 1 Yes

Decision Register

Ref / ID Decision Details Impact Proposed Date Proposed By Status Approved By Date Resulting Actions and Comments
  • tools/metalshop/bandsaw.1633518608
  • Last modified: 3 years ago
  • by ryan6338