----

===== 2017-08-29 =====


Open 20:00\\ 
Close 20:15\\
Author Michael King\\ 
Signed Brendan Halliday\\
Tally 30\\

  * Michael King
  * Rosa Tong
  * Stephanie Piper
  * Craig Hudson-Taylor
  * Robert Lawrence
  * Mike Ando
  * Luke Hovington
  * Blair Calderara
  * Nick Rigney
  * Zac Forrester
  * Beau Sandford
  * Jaimyn Mayer
  * Lysa Singh
  * Brendan Halliday
  * David Longland
  * Stuart Longland
  * David Alan Mehigan
  * Megs Drinkwater
  * James Churchill
  * Amy Mack
  * Lucas Oldfield
  * Ben McGreevy
  * Eris Ryan
  * Joshua Hogendorn
  * Alex Wixted
  * Sven Hanzka
  * Michael Richmond
  * Nathan Beveridge
  * Laurent Aupetit
  * Ian Haly 


----

===== Agenda =====

  * Brisbane Festival
  * Interlock hardware core parts ($1200)
  * Two induction soldering irons and parts ($750)
  * Creality CR-10 3D Printer ($700)

===== Meeting Notes =====

  * Brisbane Festival - we will be holding 4x 1 hour sessions on scribble bots, and are currently looking for volunteers to run these sessions; please indicate your your interest on the Google sheet in the applicable forum post.
  * A working bee was held to clear the area behind the work sheds for the new woodshop container; the area has nearly been cleared for the new container, but some work still remains - this will be carried out on Saturday 2nd September.
  * A working bee to construct the new interlocks has been raised, this will be held in the upcoming month for a couple of hours.
  * A working bee will be held at the end of September to remove the annex in the woodshop

===== Treasury Report =====

  * $3441 for causes to spend

===== Votes =====

  * Interlock parts - this is for the second version of the interlock (compared to the one on the table saw); it is smaller and more modular, using a smaller contactor and a different Sonoff board; a working prototype exists, costing approximately $60 per interlock; 0 opposed, 2 abstained, ****motion passed****.
  * Induction soldering irons - these are of a similar type to the Metcal unit we have, however these new irons have an auto-off function to prevent tip oxidation, as well as temperature-controlled tips; the proposed budget is for two units and a number of spare tips; 0 opposed, 2 abstained, ****motion passed****.
  * CR-10 3D Printer - DigiFab have already purchased one unit, the second unit will allow us to retire both of the older units - these are less hobby-grade, but they can be repaired with parts on-site, a deal has been made with Creality for "Buy 3 for the price of 2"; 0 opposed, 0 abstained, ****motion passed****.

===== Thanks =====

  * Craig for organising woodshop working bee
  * Craig, Stuart, Beau, Eris and Josh (among others) for their works to remove the concrete structure behind the woodshop