====== 2022-09-12 Meeting Minutes =====
**Attendance:**
  * Ben Jackson
  * Eris Ryan
  * Ryan Marple
  * Dave Seff

**Opened:** 7:40\\
**Closed:** 8:50

==== General Business ====
=== Air lines: ===
The following machines/areas require air lines. Actual implementation to be further investigated by Ryan.
  * YAG
  * HILDI
  * Lathes & mill
  * Manifold
  * Plasma
  * Manifold
  * Spring line for air guns

=== Open Day: ===
  * Dave on HILDI
  * Ryan on YAG
  * Ben & Eris should be available
  * Phil to be notified of open day
  * Look into options for custom items that are easy to make and may be sold (ie. Cutting name into steel on yag)
  * 19th of Nov working bee
  * Make it clear to other members that it’s not a project day
  * Put signs up about no projects on open day
  * Make announcements about no projects on open day
  * Created project taskade for open day

=== Other ===
  * Team meetings to be held 7:30pm Monday before the general meeting

==== Projects ====
=== Magnabend ===
  * Waiting on coil. Assigned to Eris & Josh.
  * Base is almost done. Drilling and tapping is required for mounting to stand. Assigned to Dave.

=== Gas Bottle Safety ===
  * Wait until gas monitoring project is done or further progressed.

=== Gas Monitoring System ===
  * Have a meeting at a later point on the gas monitoring project. Will meet Tuesday 13th.

=== Blue Lathe ===
  * Working fine
  * Power leads need to be cleaned up for blue lathe. Assigned to Ben.

=== Green Lathe ===
  * Electrician Required
  * Working fine

=== Milling Machine ===
  * New bolt for quill feed to prevent loss of parts. Assigned to Ben
  * Mill axis lock levers replaced by Phil.
  * Need to diagnose x-axis autofeed. Will ask Phil.
  * Need to investigate coolant in one shot oiler. Will ask Phil.

=== Horizontal Bandsaw ===
  * Non functional
  * Waiting on electrician for switch replacement

=== HILDI ===
  * Get new tool setter. assigned to Ryan
  * Mount usb hub. assigned to Ryan

=== YAG ===
  * NUC HDD is low on space. Added task to look into it at a later date.
  * Consumables need to be ordered.
  * Shielding needs to be done. Assigned to Eris.
  * Order shielding film. Assigned to Ryan.
  * Mount water filter to drum trolley. assigned to Eris and Ryan.
  * Added YAG usage document as task. Assigned to Ryan. Chris Noonan may have info.

=== Plasma Cutter ===
  * Awaiting Replacement.
  * Seek ~$1000 for plasma cutter. Make Proposal. Assigned to Ryan.

=== TIG Welder ===
  * Working fine
  * May need gas soon. No noticed gas leaks for the current bottle.

=== MIG Welder ===
  * Need new roll of wire. Eris to buy.
  * Working fine.

=== Cold Cut Saw ===
  * Had blades sharpened. Cost $55 for 2 blades.
  * Eris has float switch for coolant tank.

=== Startrite Bandsaw ===
  * Out of commission.
  * Gearbox to be inspected. Assigned to Dave.

=== Electrician ===
  * Green lathe interlock
  * Horizontal bandsaw switch

==== Voting Items ====
=== Toolroom Mill ===
  * Sell toolroom mill - UNANIMOUS
  * Buy plasma cutter & YAG spares w/profit if possible.

==== Member Report ====
The following members met their volunteer requirements for the month:
  * Ben Jackson
  * Eris Ryan
  * Ryan Marple
  * Dave Seff
  * Phil Juric