<WRAP column third>
{{:tools:craftpunk:husqvarnaviking-designer-jade-35-750x400.jpg?400|}}
</WRAP>
<WRAP column twothirds>
======  Husqvarna Designer Jade 35 Embroidery Machine ======
| Aliases | "Embroidery machine"  |
| Other References |<WRAP> 
//[[https://snipe.hsbne.org/|Asset Register]]//

//[[https://xero.com/|Xero Asset]]//

//[[https://portal.hsbne.org/|Portal]]//

[[https://forum.hsbne.org/search?q=embroidery%20machine|Forum Posts]]

</WRAP>|
| Official Maintainer | Emily Taylor |
</WRAP>
<WRAP clear></WRAP>

===== Current Status =====

<WRAP safety half round>
=== Working ===

Machine is working as expected. Last tested 18/10/2020
</WRAP>
===== Usage =====

<WRAP half  round info >
**This machine is <wrap hi>generally available</wrap> to use.**
</WRAP>


{{:tools:craftpunk:v2_husqvarna_designer_jade_35_embroidery_machine_induction_process.png?400|}}

Induction process is:
  - Watch either of the introduction videos
    - [[https://www.youtube.com/watch?v=h_uhV8DiyXI|This is Husqvarna's official page]]
    - [[https://www.youtube.com/watch?v=lggmRotQdOA|This is by Heirloom Creations]]
  - Read the rest of this page
  - You are now prepared to use this machine

==== Guidelines ====

We require that members buy higher-quality thread, as in most textile crafting, buying cheaper thread means paying for it in time lost due to threads snapping, tangling and bunching up. It is also costly in terms of machine upkeep and volunteer work if the machine breaks.\\

It is recommended to use silk thread for embroidery projects, or rayon for smaller budgets. This is because regular thread is thicker and tends to pile up or jam in embroidery machines.\\

Best to use embroidery bobbin thread because it has a finer weight, and won't build up under the embroidery.\\ 

As with all sewing projects, it is recommended to have some scrap fabric and thread to do a quick test run of your setup before commencing the full project.\\

Check the How To Page for more help with embroidering. [[howto:make_an_embroidery_pattern|Making an original pattern to embroider]]\\

==== Recommended PPE ====

<WRAP column half>
| Required | {{:resources:ppe-wearenclosedshoes.gif?nolink&200|}} | Enclosed shoes are required, no open sandals, thongs etc |
</WRAP>
<WRAP clear></WRAP>

===== Machine Specifications =====

^ Name  ^ Value  ^
| Embroidery Area | 240x150mm |
| Sewing Space | 200mm |
| Needle Positions | 29 |

===== Documents =====

Below is the full Husqvarna manual, and the quick-guide to the features.

{{ :tools:craftpunk:designer_jade_35_manual_en.pdf |}}
{{ :tools:craftpunk:designer_jade_35-features-en.pdf |}}
 
===== Manufacturer =====

=== Manufacturer ===

  * E [[http://www.husqvarnaviking.com/en-AU/Contact-Us|The website link for written contact]]
  * P (02) 4337 3737 Call Monday – Thursday: 8.30am – 4.30pm AEST
  * [[http://www.husqvarnaviking.com/Machines/DESIGNER-JADE-35]]

=== Reseller ===

  * River City Sewing Machine Centre
  * E sales@rivercitysewing.com.au
  * P 07 3393 5575

===== Known Issues =====

^ Date ^ Description ^ Workaround ^ Proposed Remediation | 
| None | PLACEHOLDER Describe the problem | PLACEHOLDER Describe the workaround currently in place | Placeholder Describe a proposed fix or solution |  

===== Modifications / Repair History =====

^ Date ^ Modified By ^ Description ^ Remediation ^ Cost ^
| None | PLACEHOLDER NAME | PLACEHOLDER Describe what happened | PLACEHOLDER Describe how it was fixed or modified | PLACEHOLDER document the cost of the change |


===== Accessories =====

^ Image ^ Category ^ Accessory Name & Notes ^ Location ^ Buy from ^
| {{:tools:craftpunk:thread_net.png?200|}} | Material Handling | **Thread net** \\ Used like a spool sock, this smooths out thread and keep it tangle-free. | in the accessory pack | Available at all sewing supply stores |
| {{:tools:craftpunk:edge_guide.png?200|}} | Material Handling  | **Edge guide** \\ : Use the edge guide to sew successive rows. Insert the edge guide into the hole of the presser foot holder. Set the desired spacing by sliding the edge guide | in the accessory pack | [[http://husqvarnaviking.com/Available on the Husqvarna website]]  |
| {{:tools:craftpunk:felt_pad.png?200|}} | Material Handling | **Felt pad** \\ Placed between the spool and the spindle holder to ensure smooth rotation | in the accessory pack | [[http://husqvarnaviking.com/Available on the Husqvarna website]] |
| {{:tools:craftpunk:bobbin.png?200|}} | Material Handling | **Bobbin** \\ Holder for thread that interlaces with the top thread | in the accessory pack | [[http://husqvarnaviking.com/Available on the Husqvarna website]] |
| {{:tools:craftpunk:screwdriver.png?200|}} | Maintenance | **Flat screwdriver** \\ Screwdriver used to change the needle | in the accessory pack | [[http://husqvarnaviking.com/Available on the Husqvarna website]] |
| {{:tools:craftpunk:auxilary_spool_pin.png?200|}} | Material Handling | **Auxiliary spool pin** \\ The auxiliary spool pin is used when winding a bobbin thread from a second spool of thread or for a second spool when sewing with a twin needle | in the accessory pack | [[http://husqvarnaviking.com/Available on the Husqvarna website]] |
| {{:tools:craftpunk:seam_ripper.png?200|}} | Material Handling | **Seam ripper** \\ Used to remove unwanted stitches | [[http://husqvarnaviking.com/Available on the Husqvarna website]] |
| {{:tools:craftpunk:brush.png?200|}} | Cleaning maintenance | **Cleaning brush** \\ Used to clean out the bobbin area | in the accessory pack | [[http://husqvarnaviking.com/Available on the Husqvarna website]] |
| {{:tools:craftpunk:needle_plate_screwdriver.png?200|}} | Cleaning maintenance | **Needle plate screwdriver** \\ Used to unscrew the bobbin plate in order to clean the bobbin area | in the accessory pack | [[http://husqvarnaviking.com/Available on the Husqvarna website]] |
| {{:tools:craftpunk:spool_cap_small.png?200|}} | Material Handling | **Spool cap small** \\ This makes sure the thread on small spools does not jump around on you as you sew, it holds the thread in place so that it unwinds properly. | in the accessory pack | [[http://husqvarnaviking.com/Available on the Husqvarna website]] |
| {{:tools:craftpunk:spool_cap_large.png?200|}}| Material Handling | **Spool cap large** \\ This makes sure the thread on large spools does not jump around on you as you sew, it holds the thread in place so that it unwinds properly. | in the accessory pack | [[http://husqvarnaviking.com/Available on the Husqvarna website]] |
| {{:tools:craftpunk:usb_drive.png?200|}} | Programming | **USB drive** \\ Used to transfer embroidery patterns from PC to machine | in the accessory pack | [[http://husqvarnaviking.com/Available on the Husqvarna website]] or any good stationary shop |
| {{:tools:craftpunk:long_needle_clamp_screw.png?200|}} | Material Handling | **Long needle clamp screw** \\ for free motion sewing with over 4mm stitch width and for optional accessories that rest on the needle clamp screw when mounted | in the accessory pack | [[http://husqvarnaviking.com/Available on the Husqvarna website]] |
| {{:tools:craftpunk:embroidery_hoop.png?200|}} | Material Handling | **Embroidery hoop** \\ Used to hold the fabric correctly in place | [[http://husqvarnaviking.com/Available on the Husqvarna website]] |
| {{:tools:craftpunk:foot_pedal.jpg?200|}} | Machine operation | **Foot pedal** \\ Used to operate the machine when doing seams | in the accessory pack | [[http://husqvarnaviking.com/Available on the Husqvarna website]] |


=== Presser feet ===
For ease of documentation, please see the page below on the individual presser feet and their functions

{{ :tools:craftpunk:page_9.pdf |}}

===== Consumables & Running Costs =====

This machine consumes fabric and thread, both are to be supplied by the member using it. Craftpunk will supply the five standard needles that came with the machine, for any special project requirements members are expected to supply their own needles. 

To see the five needle types provided, please see the page below. 

{{ :tools:craftpunk:page_22.pdf |}}

^ Image ^ Category ^ Accessory Name & Notes ^ Location ^ Buy from ^
| PLACEHOLDER Image, 100 width | PLACEHOLDER Category of consumable | **PLACEHOLDER Consumable Name** \\ PLACEHOLDER Consumable description and usage | PLACEHOLDER Description of where the consumable is stored | PLACEHOLDER Link to where it can be bought |


===== Maintenance =====

^ Interval ^ Task ^
| After each use | Dust/wipe with a soft cloth (Chux are in the Stockroom) down external faces to remove leftover thread or dust build up |
| As needed | Cleaning the bobbin area\\

 - Remove the presser foot
 - Push the bobbin cover release button to the right of the bobbin cover
 - Use the screwdriver in the accessories pack to remove the two screws in the needle plate 
 - Lift off the entire plate
 - There is a brush provided in the accessories pack to dust out the feed teeth and bobbin area

|
| Never | Oiling- Manufacture maintenance specifies that this machine does not need oiling |

===== RACI =====

PLACEHOLDER A RACI is an important documentation process to let people know what ACTIONS can happen, and who needs to be Responsible, Accountable, Consulted and Informed for each ACTION. Delete this line.

<WRAP column third>
{{:tools:woodshop:raci.png?direct|}}
</WRAP>
<WRAP column twothirds>
^ Task / Action ^ Executive ^ Cause Leader \\ Cause Team ^ Named Maintainer ^ Trainers ^ Cause ^ Membership ^ Implementer ^
| Modification and Repairs | - | AC | C | I | I | I | R |
| Induction changes        | C | RACI | RC | I | I | I | R |
</WRAP>
<WRAP clear></WRAP>

===== Risk Matrix and Mitigation =====

PLACEHOLDER: Risk assessment is important to ensure we are making tools available to members in a responsible fashion. Please make every effort to do a reasonable risk assessment. If there is a safety incident with the tool, please redo a risk assessment and add it to the table.

<WRAP column third>
{{:tools:woodshop:riskmatrix3x3.png?direct|}}
</WRAP>

<WRAP column twothirds>
^ Ref / ID ^ Pre-Mitigation |||^ Mitigations / Warnings / Remedies ^ Post Mitigation |||^
^ ::: ^ Risk ^ Risk Severity ^ Risk Likelyhood ^ Risk Level ^ ::: ^ Risk Severity ^ Risk Likelyhood ^ Risk Level ^ Acceptable to Proceed ^
| 0001 | Needle injury to fingers | High| Possible | 8 | Reminder in induction users in correct usage | Low | Improbable | 1 |
| 0002 | Dropping machine on foot | High| Improbable | 6 | Do not allow members to move the machine | Low | Improbable | 1 |
| 0003 | Needle injury to the eyes | Intolerable | Improbable | 10 | Have replacement needles available to reduce wear and tear on existing needles  | High | Improbable | 6 |
| 0004 | Tripping over machine cords | Medium | Possible | 5 | Do not allow members to move machines | Low | Improbable | 1 |
| 0005 | Swallowing pins or needles | Intolerable | Improbable | 10 | Have pin trays available and use encouraged | Low | Improbable | 1 |
| 0006 | Back injury due to hunching | Medium | Probable | 7 | Encourage the correct use of chairs, and ergonomic setup | Low | Improbable | 1 |
</WRAP>
<WRAP clear></WRAP>

===== Decision Register =====

Decisions that require recording: To change its location, mode of operation, to buy an accessory, to replace something, to change how it operates etc.

^ Ref / ID ^ Decision Details ^ Impact ^ Proposed Date ^ Proposed By ^ Status ^ Approved By ^ Date ^ Resulting Actions and Comments ^
| 0000 | Example decision | Provides an example | 08/08/20 | JH | Approved | JH | 08/08/20 | A line was put in the register |