{{:tools:metalshop:speedcut50pfc-ver1.3-main_600x600.png?400|}} ====== Plasma Cutter - SWS Speedcut 50 ====== | Aliases | "Plasma" | | Other References | //[[https://snipe.hsbne.org/|Asset Register]]// //[[https://xero.com/|Xero Asset]]// //[[https://portal.hsbne.org/|Portal]]// | | Official Maintainer | Eris Ryan | ===== Current Status ===== === Working === Machine is working as expected. ===== Usage ===== **This machine requires induction to use.** Book an induction in Eventbrite. \\ [[https://www.eventbrite.com/cc/metalshop-inductions-804979]] ==== Guidelines ==== Ensure you follow the guidelines as per the induction. ==== Personal Protective Equipment ==== | Required | {{ :resources:ppe-wearenclosedshoes.gif?nolink&100 |}} | Enclosed shoes are required, no open sandals, thongs etc | | Required | {{ :resources:ppe-wearweldinghelmet.gif?nolink&100 |}} | Wear a welding helmet while welding | | Recommended | {{ :resources:ppe-wearrespirator.gif?nolink&100 |}} | We recommend the use of a respirator when welding fumes are generated | | Recommended | {{ :resources:ppe-wearhandprotection.gif?nolink&100 |}} | Wear heat-resistant welding gloves when welding | | Recommended | {{ :resources:ppe-wearprotectiveclothing.gif?nolink&100 |}} | Wear flame retardant clothing while welding | ===== Machine Specifications ===== ^ Name ^ Value ^ | Mild Steel Cutting Capacity | 20mm @ 320 mm/minute (25mm severance) | | Stainless Steel Cutting Capacity | 12mm @ 380 mm/minute | | Aluminum Cutting Capacity | 10mm @ 380 mm/minute | | Minimum Air Compressor Requirements | 100 L/m ‑ 60 psi | | Duty Cycle 40° AMB | 50% @ 45A 100% @ 26A | | Duty Cycle 25° AMB | 60% @ 50A 100% @ 40A | ===== Documents ===== {{ :tools:metalshop:speedcut_50_operating_manual_ver_1.3_june_2017.pdf |}} ===== Manufacturer ===== === Manufacturer === * [[https://swswelding.com.au/collections/machines/products/plasma-cutter-buy-online|SWS Welding]] ===== Known Issues ===== ^ Date ^ Description ^ Workaround ^ Proposed Remediation ^ | | | | | ===== Modifications / Repair History ===== ^ Date ^ Modified By ^ Description ^ Remediation ^ Cost ^ | | | | | | ===== Accessories ===== ^ Image ^ Category ^ Accessory Name & Notes ^ Location ^ Buy from ^ | | | | | | ===== Consumables & Running Costs ===== ^ Image ^ Category ^ Accessory Name & Notes ^ Location ^ Buy from ^ | | | | | | ===== Maintenance ===== ^ Interval ^ Task ^ | | | ===== RACI ===== PLACEHOLDER A RACI is an important documentation process to let people know what ACTIONS can happen, and who needs to be Responsible, Accountable, Consulted and Informed for each ACTION. Delete this line. {{:tools:woodshop:raci.png?direct|}} ^ Task / Action ^ Executive ^ Cause Leader \\ Cause Team ^ Named Maintainer ^ Trainers ^ Cause ^ Membership ^ Implementer ^ | Modification and Repairs | - | AC | C | I | I | I | R | | Induction changes | C | RACI | RC | I | I | I | R | ===== Risk Matrix and Mitigation ===== PLACEHOLDER: Risk assessment is important to ensure we are making tools available to members in a responsible fashion. Please make every effort to do a reasonable risk assessment. If there is a safety incident with the tool, please redo a risk assessment and add it to the table. {{:tools:woodshop:riskmatrix3x3.png?direct|}} ^ Ref / ID ^ Pre-Mitigation |||^ Mitigations / Warnings / Remedies ^ Post Mitigation |||| | ::: ^ Risk ^ Risk Severity ^ Risk Likelyhood ^ Risk Level | ::: ^ Risk Severity ^ Risk Likelyhood ^ Risk Level ^ Acceptable to Proceed ^ | 0001 | Death | Severe | Possible | 15 | Induction to train users in correct usage. | Severe | Very Unlikely | 5 | Yes | | 0002 | Electric Shock | Major | Unlikely | 8 | Induction to train users in correct usage.\\ Ensure power cables are properly connected and off the floor.\\ Cables are tested and tagged and inspected for damage. | Minor | Very Unlikely | 2 | Yes | | 0003 | Noise | Moderate | Likely | 12 | Train users to wear hearing protection. | Insignificant | Unlikely | 2 | Yes | | 0004 | Tripping Hazard | Moderate | Possible | 9 | Train users to maintain a clean working area.\\ Keep all cables off the ground and secured out of the way. | Insignificant | Unlikely | 2 | Yes | | 0005 | Insufficient Lighting | Minor | Possible | 6 | Turn on shop lights.\\ Open metal-shop doors for natural lighting. | Insignificant | Unlikely | 2 | Yes | | 0006 | Fumes | Major | Likely | 16 | Induction to train users in correct usage.\\ Open metal-shop door to allow ventilation.\\ Fans are provided top assist in ventilation. \\ Require appropriate respiratory protection. \\ Unauthorised access into welding area is prohibited.\\ Other metal-shop users are informed that welding is in progress. | Minor | Possible | 6 | Yes | | 0007 | Ejection of Sparks and Materials | Major | Likely | 16 | Induction to train users in correct usage.\\ Require aappropriate welding shield with suitable eye protection is provided and worn.\\ Screens are provided around the work area and are required to be used.\\ Unauthorised access into welding area is prohibited.\\ Other metal-shop users are informed that welding is in progress. | Minor | Possible | 6 | Yes | | 0008 | Welding Flash / Eye Damage | Major | Likely | 16 | Induction to train users in correct usage.\\ Appropriate welding shield with suitable eye protection is provided and worn.\\ Screens are provided around the work area and are required to be used.\\ Unauthorised access into welding area is prohibited.\\ Other metal-shop users are informed that welding is in progress. | Minor | Possible | 6 | Yes | | 0009 | Contact with Hot Parts | Major | Likely | 16 | Induction to train users in correct usage.\\ Require use of appropriate PPE.\\ Suitable how work gloves are provided and required to be worn. | Minor | Unlikely | 4 | Yes | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ===== Decision Register ===== A decision register is for general documentation when some decision is made regarding the tool. To change its location, mode of operation, to buy an accessory, to replace something, to change how it operates etc. Delete this line. ^ Ref / ID ^ Decision Details ^ Impact ^ Proposed Date ^ Proposed By ^ Status ^ Approved By ^ Date ^ Resulting Actions and Comments ^ | | | | | | | | | |