{{:tools:metalshop:unimig_425_w_kt50.jpg?600|}} ====== Welder, MIG - UNIMIG 425 SWF ====== | Aliases | "MIG Welder" | | Other References | //[[https://snipe.hsbne.org/|Asset Register]]// //[[https://xero.com/|Xero Asset]]// //[[https://portal.hsbne.org/|Portal]]// //[[https://forum.hsbne.org/search?q=table%20saw|Forum Posts]]// | | Official Maintainer | None | ===== Current Status ===== === Working === Machine is working as expected. ===== Usage ===== **This machine requires induction to use.** Book an induction in Eventbrite. \\ [[https://www.eventbrite.com/cc/metalshop-inductions-804979]] ==== Personal Protective Equipment ==== | Required | {{ :resources:ppe-wearenclosedshoes.gif?nolink&100 |}} | Enclosed shoes are required, no open sandals, thongs etc | | Required | {{ :resources:ppe-wearweldinghelmet.gif?nolink&100 |}} | Wear a welding helmet while welding | | Recommended | {{ :resources:ppe-wearrespirator.gif?nolink&100 |}} | We recommend the use of a respirator when welding fumes are generated | | Recommended | {{ :resources:ppe-wearhandprotection.gif?nolink&100 |}} | Wear heat-resistant welding gloves when welding | | Recommended | {{ :resources:ppe-wearprotectiveclothing.gif?nolink&100 |}} | Wear flame retardant clothing while welding | ===== Machine Specifications ===== PLACEHOLDER: Please fill out this table with all relevant machine specifications. The manufacturers website usually gives a good list. Delete this line. ^ Name ^ Value ^ | Input Voltage | 415V | | Output Voltage | 30 Steps 16-32.5V | | Spool Size | 5kg/15kg | | Wire Size Range | 0.6-1.2mm | ===== Documents ===== {{ :tools:metalshop:workshop-425-swf-manual.pdf | Manual }} ===== Manufacturer ===== === Manufacturer === * E qld@unimig.com.au * P 07 3333 2855 * [[https://unimig.com.au/]] === Reseller === * Hare & Forbes Machineryhouse * M 07 3715 2200 * [[https://www.machineryhouse.com.au/]] ===== Known Issues ===== ^ Date ^ Description ^ Workaround ^ Proposed Remediation | | 01/01/2020 | PLACEHOLDER Describe the problem | PLACEHOLDER Describe the workaround currently in place | Placeholder Describe a proposed fix or solution | ===== Modifications / Repair History ===== ^ Date ^ Modified By ^ Description ^ Remediation ^ Cost ^ | 01/01/2020 | PLACEHOLDER NAME | PLACEHOLDER Describe what happened | PLACEHOLDER Describe how it was fixed or modified | PLACEHOLDER document the cost of the change | ===== Accessories ===== ^ Image ^ Category ^ Accessory Name & Notes ^ Location ^ Buy from ^ | PLACEHOLDER Image, 100 width | PLACEHOLDER Category of accessory | **PLACEHOLDER Accessory Name** \\ PLACEHOLDER Description and usage notes for accessory | PLACEHOLDER Describe location of accessory | PLACEHOLDER Link to where it was bought from | ===== Consumables & Running Costs ===== ^ Image ^ Category ^ Accessory Name & Notes ^ Location ^ Buy from ^ | | Torch Parts | **Contact Tips** \\ Contact tips for 0.9mm steel wire | Stored in MIG Kit Inside Welding Cabinet | **Hampdon** \\ [[https://www.hampdon.com.au/mig-contact-tips-0.9mm-binzel-style-25-pack-m6-x-8 | 0.9mm Contact Tips ]] | ===== Maintenance ===== ^ Interval ^ Task ^ | PLACEHOLDER Pick one: Daily/Weekly/Monthly/Quarterly/Biannual/Annual | PLACEHOLDER Description of maintenance task and any relevant parameters | ===== RACI ===== PLACEHOLDER A RACI is an important documentation process to let people know what ACTIONS can happen, and who needs to be Responsible, Accountable, Consulted and Informed for each ACTION. Delete this line. {{:tools:woodshop:raci.png?direct|}} ^ Task / Action ^ Executive ^ Cause Leader \\ Cause Team ^ Named Maintainer ^ Trainers ^ Cause ^ Membership ^ Implementer ^ | Modification and Repairs | - | AC | C | I | I | I | R | | Induction changes | C | RACI | RC | I | I | I | R | ===== Risk Matrix and Mitigation ===== PLACEHOLDER: Risk assessment is important to ensure we are making tools available to members in a responsible fashion. Please make every effort to do a reasonable risk assessment. If there is a safety incident with the tool, please redo a risk assessment and add it to the table. {{:tools:woodshop:riskmatrix3x3.png?direct|}} ^ Ref / ID ^ Pre-Mitigation |||^ Mitigations / Warnings / Remedies ^ Post Mitigation |||| | ::: ^ Risk ^ Risk Severity ^ Risk Likelyhood ^ Risk Level | ::: ^ Risk Severity ^ Risk Likelyhood ^ Risk Level ^ Acceptable to Proceed ^ | 0001 | Death | Severe | Possible | 15 | Induction to train users in correct usage. | Severe | Very Unlikely | 5 | Yes | | 0002 | Electric Shock | Major | Unlikely | 8 | Induction to train users in correct usage.\\ Ensure power cables are properly connected and off the floor.\\ Cables are tested and tagged and inspected for damage. | Minor | Very Unlikely | 2 | Yes | | 0003 | Noise | Moderate | Likely | 12 | Train users to wear hearing protection. | Insignificant | Unlikely | 2 | Yes | | 0004 | Tripping Hazard | Moderate | Possible | 9 | Train users to maintain a clean working area.\\ Keep all cables off the ground and secured out of the way. | Insignificant | Unlikely | 2 | Yes | | 0005 | Insufficient Lighting | Minor | Possible | 6 | Turn on shop lights.\\ Open metal-shop doors for natural lighting. | Insignificant | Unlikely | 2 | Yes | | 0006 | Fumes | Major | Likely | 16 | Induction to train users in correct usage.\\ Open metal-shop door to allow ventilation.\\ Fans are provided top assist in ventilation. \\ Require appropriate respiratory protection. \\ Unauthorised access into welding area is prohibited.\\ Other metal-shop users are informed that welding is in progress. | Minor | Possible | 6 | Yes | | 0007 | Ejection of Sparks and Materials | Major | Likely | 16 | Induction to train users in correct usage.\\ Require aappropriate welding shield with suitable eye protection is provided and worn.\\ Screens are provided around the work area and are required to be used.\\ Unauthorised access into welding area is prohibited.\\ Other metal-shop users are informed that welding is in progress. | Minor | Possible | 6 | Yes | | 0008 | Welding Flash / Eye Damage | Major | Likely | 16 | Induction to train users in correct usage.\\ Appropriate welding shield with suitable eye protection is provided and worn.\\ Screens are provided around the work area and are required to be used.\\ Unauthorised access into welding area is prohibited.\\ Other metal-shop users are informed that welding is in progress. | Minor | Possible | 6 | Yes | | 0009 | Contact with Hot Parts | Major | Likely | 16 | Induction to train users in correct usage.\\ Require use of appropriate PPE.\\ Suitable how work gloves are provided and required to be worn. | Minor | Unlikely | 4 | Yes | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ===== Decision Register ===== PLACEHOLDER: A decision register is for general documentation when some decision is made regarding the tool. To change its location, mode of operation, to buy an accessory, to replace something, to change how it operates etc. Delete this line. ^ Ref / ID ^ Decision Details ^ Impact ^ Proposed Date ^ Proposed By ^ Status ^ Approved By ^ Date ^ Resulting Actions and Comments ^ | 0000 | Example decision | Provides an example | 08/08/20 | JH | Approved | JH | 08/08/20 | A line was put in the register |