Meeting Opened: 7:30
Meeting Closed: 8:30
Author: Ben Jackson
Ryan M to purchase bulk coolant as it is on special.
- None
Toolpost for the blue lathe has a broken park. Looking to see if a replacement can be found. Potential tooth missing on lower speed – very noisy. Look at buying new motor for the blue lathe.
The scale for the compound has been fixed. Proposal in for a DRO. When we replace it we will also look at the oil leaks in the apron.
Ryan F to create new auto feed spindle for handle. Ryan F has grease for the back gear. 150mm Vice has failed and is not repairable. Proposal in to get a new one.
All in good working order.
Has anew USB Hub Software updates; tool setter, tool changing buttons, spindle speed, coolant light. Y axis protective rubber replaced Way oiler repaired.
Ryan to write up usage procedures.
Tig may have a gas flow issue. Further investigation required.
Ryan M to organise getting the blades sharpened. Magna bend Waiting until the end of July to see if it is likely to be finished. Otherwise a pan brake will need to be purchased as an interim.
Ryan M has brought in all the parts and he and Ryan F are re-assembling.
- None
- None