Printer: Zebra P330i
| Aliases | “Card Printer”, “Access card printer”, “Swipe card printer” |
| Other References | |
| Official Maintainer | PLACEHOLDER Please provide maintainer(s) name(s) |
Current Status
Out of Order
Machine is able to print self test cards. Does not connect via USB
GeoffC March 2021
Usage
This machine does not require induction to use.
Guidelines
The set up , printer/laptop/card reader/cards, required to process batches of cards fills about 1.5m to 2m of desk space. A HowTo is under development and files from this page support Access Card Printing .
Recommended PPE
The printer is recommended for general office use. Even the toner ribbons can be handled without risk of stains or marks.
The printer should be used in a clean workspace or office area.
Machine Specifications
| Name | Value |
|---|---|
| Electrical supply | Single Phase 240v |
| Communications | USB Type B |
| Manual Feed | right side slot |
| Hopper Feed | Under right side blue panel |
| Output hopper capacity | 90 to 100 HSBNE cards |
| Toner ribbons | 1. Black and white (qty 2) 2. Colour (qty 1) |
Documents
Manufacturer
Reseller
- Mr. Long Ago
- Far Far Away
Known Issues
| Date | Description | Workaround | Proposed Remediation |
|---|---|---|---|
| 10/0/2020 | USB communications with PC failed | Nil | HSBNE member evaluates power supply, HSBNE member attempts chip level repair, replacement main board purchased and installed (eBay has $150 to $400 parts prices) |
Modifications / Repair History
| Date | Modified By | Description | Remediation | Cost |
|---|---|---|---|---|
| 10/02/2021 | GeoffC | Ribbon would not release from printed card | Replaced drive belt  | about $25 |
Accessories
| Image | Category | Accessory Name & Notes | Location |
|---|---|---|---|
 | Communications cable | USB printer cable Type B | Some Place or BYO |
Consumables & Running Costs
| Image | Category | Accessory Name & Notes | Location | Buy from |
|---|---|---|---|---|
| PLACEHOLDER Image, 100 width | PLACEHOLDER Category of consumable | PLACEHOLDER Consumable Name PLACEHOLDER Consumable description and usage | PLACEHOLDER Description of where the consumable is stored | PLACEHOLDER Link to where it can be bought |
Maintenance
| Interval | Task |
|---|---|
| Annual | Review maintenance suggestions in manual and on Zebra web site |
RACI
| Task / Action | Executive | Cause Leader Cause Team | Named Maintainer | Trainers | Cause | Membership | Implementer |
|---|---|---|---|---|---|---|---|
| Modification and Repairs | - | AC | C | I | I | I | R |
| Induction changes | C | RACI | RC | I | I | I | R |
Risk Matrix and Mitigation
| Ref / ID | Pre-Mitigation | Mitigations / Warnings / Remedies | Post Mitigation | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Risk | Risk Severity | Risk Likelyhood | Risk Level | Risk Severity | Risk Likelyhood | Risk Level | Acceptable to Proceed | ||
| 0001 | PLACEHOLDER DEATH | Intolerable | Low | 10 | Test and tag before use, RCD on power circuit | Low | Improbable | 1 | |
Decision Register
PLACEHOLDER: A decision register is for general documentation when some decision is made regarding the tool. To change its location, mode of operation, to buy an accessory, to replace something, to change how it operates etc. Delete this line.
| Ref / ID | Decision Details | Impact | Proposed Date | Proposed By | Status | Approved By | Date | Resulting Actions and Comments |
|---|---|---|---|---|---|---|---|---|
| 0000 | Example decision | Provides an example | 08/08/20 | JH | Approved | JH | 08/08/20 | A line was put in the register |