Differences

This shows you the differences between two versions of the page.

Link to this comparison view

projects:snarc [2016/03/14 07:42]
127.0.0.1 external edit
projects:snarc [2019/06/07 05:11] (current)
riumplus https
Line 36: Line 36:
   * The first batch of boards that use a 328-PU instead of the 328P have a known ERRATA:   * The first batch of boards that use a 328-PU instead of the 328P have a known ERRATA:
   * You can recognise these boards as they have the MOSFET at right angles to the Vreg's   * You can recognise these boards as they have the MOSFET at right angles to the Vreg's
-  * When programming via the ICSP header , you need to edit your avrdude.conf as per the following link before it will work: http://​arduino.cc/​forum/​index.php?​topic=58670.0+  * When programming via the ICSP header , you need to edit your avrdude.conf as per the following link before it will work: https://​arduino.cc/​forum/​index.php?​topic=58670.0
  
   * If you instead use the 5V/​RX/​TX/​GND header to connect to an FTDI cable, then you can use the pre-programmed bootloader without any need for the above change. ( just like early arduino'​s,​ you'll need to press reset buttton during upload process to trigger the bootloader unless you also connect the reset wire to the reset button. More details for the break-out for FTDI interface is pending.   * If you instead use the 5V/​RX/​TX/​GND header to connect to an FTDI cable, then you can use the pre-programmed bootloader without any need for the above change. ( just like early arduino'​s,​ you'll need to press reset buttton during upload process to trigger the bootloader unless you also connect the reset wire to the reset button. More details for the break-out for FTDI interface is pending.