Differences

This shows you the differences between two versions of the page.

--- causes:digitalfabrication [2020/04/14 14:44]
nogthree
+++ causes:digitalfabrication [2020/10/28 00:23]
jabelone
@@ Line 1: / Line 1: @@
-====== Digital Fabrication Cause ======
+====== Digifab Cause ======
-{{ :causes:digifab.jpg?nolink|}}
+{{ : causes:digifab.jpg?direct&600|The digifab room}}
-<panel type="default" title="">
+<WRAP>
-**Location:** The Digital Fabrication room is the room on the left at the end of the Green Room farthest from the driveway.
-**Cause Leader:** Cause Leader: Aaron Bycroft, aka "Crofty"
+|**Location**         | Digifab is located in the left most room when you walk into the green room and turn towards Eat St. |
+|**Cause Team**       | Brendan Halliday (@nog3), Aaron Bycroft (@crofty) and Michael King (@doc) |
+|**Objective**        | Digifab's goals are to provide and maintain equipment in the principles of digital fabrication, primarily 3D printing and laser cutting. |
+|**Members**          | [[https://portal.hsbne.org/cause/list/|Portal Cause Membership]] |
+|**Communications**   | [[https://forum.hsbne.org/c/cause-effect/digital-fabrication|Forums]] \\ [[https://discord.gg/z2sTZB|Discord Chat]] \\ [[https://trello.com/invite/b/ERpgbqEh/78075b9da25bd2e659c41640dd442b30/digifab|Trello Task Tracking]] |
+|**Recommended Suppliers**| [[https://wiki.hsbne.org/causes/digitalfabrication/suppliers|See here]]. |
+|**Operating Policy** | [[causes:digitalfabrication:operatingpolicy| Operating Policy should be split out into it's own page]] |
-**Objective:** Digital Fabrication's goals are to provide, maintain, and run classes for equipment in the principles of digital fabrication and related fabrication services
+</WRAP>
-**Members:** See [[https://portal.hsbne.org/cause/list/|Current List]]
-**Recommended Suppliers**: [[https://wiki.hsbne.org/causes/digitalfabrication/suppliers|See here]].
-**Communications:** [[https://forum.hsbne.org/c/cause-effect/digital-fabrication|Forums]] and #cause-digifab in [[https://discord.gg/avtkH5t|Discord Chat]].
-**Operating Policy:** [[causes:digitalfabrication:operatingpolicy|Policy]]
-</panel>
 ===== Cause Area Rules =====
@@ Line 35: / Line 31: @@
 ===== Tools requiring Induction =====
 **3D Printers:**
-   * Induction process is to demonstrate safe use of the machine while setting up a print.
-   * Maintainers are listed on the wiki for each machine.
-**Redsail 60w Laser Cutter: **
+  * Induction process is to read the entire [[tools:digitalfabrication:3dprinters:|3D printers page]], in addition to the machine specific page.
-   * For the laser cutter, it is a hands-on class on how to use the machine after the Supervisor has checked the machine and your competency.
-   * Use requires supervision even after this, but it will generally be less hands on and more the Supervisor ensuring the machine is operating properly.
-   * Supervisors are listed on the tool's wiki page.
+**Redsail 60w Laser Cutter: **
+  * For the laser cutter, it is a hands-on class on how to use the machine after the Supervisor has checked the machine and your competency.
+  * Use requires supervision even after this, but it will generally be less hands on and more the Supervisor ensuring the machine is operating properly.
+  * Supervisors are listed on the tool's wiki page.
 ===== Tools requiring Supervision =====
   - Laser cutters: The machines themselves require supervision, so a supervisor must be around for the machines to be operated by anyone.