Differences

This shows you the differences between two versions of the page.

--- tools:woodshop:bandsaw [2021/01/10 20:37]
duncang
+++ tools:woodshop:bandsaw [2021/04/13 22:14]
ale [Maintenance]
@@ Line 48: / Line 48: @@
 ==== Induction ====
-In order to get inducted on this machine you need to contact the cause leader (Ale Moré on discord) and convene a time to make the induction.
+In order to get inducted on this machine, you need to go to the following Eventbrite event and book a place for yourself on one of the available dates.
-Unofficially we are giving at least one induction per fortnight (commonly there's more than one though) every other Tuesday, from 6pm to 7pm before the table saw assesments.
+{{https://www.eventbrite.com.au/e/bandsaw-hammer-n4400-induction-tickets-135139364477|BandSaw inductions}}
-Inductions will be coordinated via {{https://www.eventbrite.com.au/o/hsbne-inc-4654630925|Eventbrite}}
+After that, you just need to come that day and take the induction. Please pay attention to the description of the event because there's a couple of things that you need to comply with. Most importantly, be on time and bring your own mandatory PPE.
+The cause has a commitment to giving at least one induction per week on one of the machines that require induction.
+The way we organize all of this is by having fortnightly polls on the forum. By doing this we can check the actual demand and deliver a solution.
+When we create dates they will be announced through discord (woodchop channel) and the messages will be pinned.
+In summary:
+  - Check this link to see if you can book an induction: {{https://www.eventbrite.com.au/e/bandsaw-hammer-n4400-induction-tickets-135139364477|BandSaw inductions}}.
+  - Check the forum to see if there's a poll open to organize the following inductions and vote accordingly.[[https://forum.hsbne.org/c/cause-effect/woodworking/11|Woodworking forum]]
+  - Talk to the cause leader about it or start a conversation on discord.
+  - Check the helpdesk channel on discord.
 ==== Guidelines ====
-PLACEHOLDER: This is where you can document the usage practices for the machine generally. If this section gets very long, then it should be part of a canvas course for induction. Don't document maintenance procedures here, please do that below in the maintenance section. Delete this line.
+=== What's this tool for? ===
-==== Recommended PPE ====
-PLACEHOLDER: There is a large collection of PPE Icons in the "resources" folder. Please update these two columns with appropriate PPE recommendations. Columns of the tables are "Recommended/Required/Warning/Maintenance", PPE Icon and Description. Delete this line.
+In general terms this machine will allow you to cut wood and wood like materials. Particularly is good when you want to cut curves and resawing timber.
+=== What’s Resawing? ===
+Strictly, resawing is a type of rip cut (cut along the grain) but across the thickness. In other words, is a cut that will give a workpiece with the same width and length but a reduced thickness.
+In general terms, resawing could refer widely to downsizing timber. A bandsaw is good at this because it has a thing kerf compared to a table saw and it’s way more safe and forgiving than a table saw when it comes to deal with rough lumber (e.g. cup, bow, twist timber).
+=== What can I cut with it? ===
+You can cut solid wood, engineered wood (MDF, Chipboard, Plywood, CLT, OSB) and some composite materials.
+Before cutting any composite material (e.g., Plastics, resin-based materials) we ask you to talk to the woodworking cause leader about it.
+=== What I can’t cut with it? ===
+Any materials that contain glass, carbon or Kevlar fibres can’t be cut on this machine.
+==== Recommended PPE ====
 <WRAP column half>
+| Required | {{:resources:ppe-wearenclosedshoes.gif?nolink&100|}} | Enclosed shoes are required, no open sandals, thongs etc |
+| Required | {{:resources:ppe-weargoggle.gif?nolink&100|}} | Please wear goggles or a face shield |
+| Required | {{:resources:prohibition_loose_clothing_and_jewellery_prohibited.jpg?nolink&100|}}| No Loose Clothing, or Jewellery|
 | Recommended | {{:resources:ppe-wearearprotection.gif?nolink&100|}} | We recommend hearing protection. |
-| Recommended | {{:resources:ppe-weargoggle.gif?nolink&100|}} | Please wear goggles or a face shield |
 | Recommended | {{:resources:ppe-wearrespirator.gif?nolink&100|}} | We recommend the use of a respirator |
 </WRAP>
 <WRAP column half>
-| Required | {{:resources:ppe-wearenclosedshoes.gif?nolink&200|}} | Enclosed shoes are required, no open sandals, thongs etc |
+| Recommended | {{:resources:ppe-useextraction.gif?nolink&200|}} | Use Dust Extraction |
+| Recommended | {{:resources:ppe-useadjustableguard.gif?nolink&200|}} | Lower Blade Guard to just above height of workpiece |
 | Warning | {{:resources:ppe-wearhandprotection.gif?nolink&200|}} | Gloves are PPE against your material (splinters, resin etc) but are hazardous around the saw. Please carefully evaluate your use of gloves |
 | Maintenance | {{:resources:ppe-disconnect.gif?nolink&200|}} | Disconnect power to the saw before performing maintenance, including blade changes |
@@ Line 81: / Line 111: @@
 | Saw blade length max                      | 4000mm         |
 | Saw blade min width                       | 6mm            |
+| Saw blade max width                       | 20mm           |
 | Saw blade speed                           | 20m/min        |
 | Wheel diameter                            | 440mm          |
@@ Line 97: / Line 128: @@
 ===== Manufacturer =====
-PLACEHOLDER: Document the manufacturer, things like contact person names, emails, phone numbers, product urls etc. Document the reseller we bought from, and any other sources for similar things. Delete this line.
 === Manufacturer ===
-  * E sales@example.com
+  * Felder Group / Hammer
-  * P 00 0000 0000
+  * [[https://www.felder-group.com/en-au/products/bandsaws-c1958/bandsaw-classic-line-p144120]]
-  * [[https://www.example.com/]]
 === Reseller ===
-  * Mr. Re seller
+For spare parts, contact:
-  * Reseller Agencies
+  * Felder Australia
-  * E sales@reseller.com
+  * Peter Burkitt
-  * M 0000 000 000
+  * E pb@felder.net.au
-=== Known Identical Models ===
+Blades can also be purchased from Brisbane saw services.
-  * Links to other machines that are a rebrand or similar
 ===== Known Issues =====
@@ Line 142: / Line 170: @@
 ^ Interval ^ Task ^
 | PLACEHOLDER Pick one: Daily/Weekly/Monthly/Quarterly/Biannual/Annual | PLACEHOLDER Description of maintenance task and any relevant parameters |
+===== Maintenance Log =====
+^ Date        ^ Consumable                       ^ Comment                                                                                                                       ^ Member ^
+| 13/04/2021  | 10mm@4TPI General purpose blade  | A new blade was opened and added to the working set. The old one was properly labelled and left to be used as a teaching tool.  | Ale Moré    |
 ===== RACI =====