| Both sides previous revision Previous revision | |||
|
tools:woodshop:tablesaws [2022/02/26 15:40] ale [Modifications / Repair History] |
tools:woodshop:tablesaws [2022/02/26 15:42] (current) ale [Table] |
||
|---|---|---|---|
| Line 122: | Line 122: | ||
| ===== Modifications / Repair History ===== | ===== Modifications / Repair History ===== | ||
| - | ^ Date ^ Modified By ^ Description ^ Remediation ^ Cost ^ | + | ^ Date ^ Modified By ^ Description ^ Remediation ^ Cost ^ |
| - | | - | Joshua H | Rise/fall and angle handles fell apart | machined some adapters and used a surpus handle from the A331 | <$5 | | + | | - | Joshua H | Rise/fall and angle handles fell apart | machined some adapters and used a surpus handle from the A331 | <$5 | |
| - | | - | Joshua H | Ratcheting handles that secure the sliding table extension broke | replaced by better ones from ebay | ~$40 | | + | | - | Joshua H | Ratcheting handles that secure the sliding table extension broke | replaced by better ones from ebay | ~$40 | |
| - | | - | Joshua H | Angle indication on front inaccurate | shimmed with washers to be accurate | - | | + | | - | Joshua H | Angle indication on front inaccurate | shimmed with washers to be accurate | - | |
| - | | - | Joshua H | Screw for changing scribing blade height was inappropriate and crashing with table surface, and wearing due to flathead design. | Replaced with appropriate grub screw | <$5 | | + | | - | Joshua H | Screw for changing scribing blade height was inappropriate and crashing with table surface, and wearing due to flathead design. | Replaced with appropriate grub screw | <$5 | |
| - | | - | Joshua H | 90º fence stop for sliding table fence deemed unusable | replacement mechanism designed in CAD, machined by members and installed. | - | | + | | - | Joshua H | 90º fence stop for sliding table fence deemed unusable | replacement mechanism designed in CAD, machined by members and installed. | - | |
| - | | - | Craig Hudson | Riving knife always higher than blade, stopping joinery cuts. | Riving knife modified to allow for correct height for joinery | - | | + | | - | Craig Hudson | Riving knife always higher than blade, stopping joinery cuts. | Riving knife modified to allow for correct height for joinery | - | |
| - | | - | Joshua H | Sliding table fence scale hard to make accurate | Stop at end of sliding table fence replaced with wooden block tuned to make the scale on fence accurate | - | | + | | - | Joshua H | Sliding table fence scale hard to make accurate | Stop at end of sliding table fence replaced with wooden block tuned to make the scale on fence accurate | - | |
| - | | - | Joshua H | Sliding table fence angle lock bolt stretched and worn by overtightening | replaced by parts from jig kit | - | | + | | - | Joshua H | Sliding table fence angle lock bolt stretched and worn by overtightening | replaced by parts from jig kit | - | |
| - | | - | Joshua H | Sliding table clamp post unhardened and raising burrs | part hardened by forge cause | - | | + | | - | Joshua H | Sliding table clamp post unhardened and raising burrs | part hardened by forge cause | - | |
| - | | - | Joshua H & Ian Redmond | Rise and fall gear/worm totally worn and failed. | Replacement parts ordered but incorrect due to machine revision. Fix found by rotating gear 180º to unworn section | ~$150 | | + | | - | Joshua H & Ian Redmond | Rise and fall gear/worm totally worn and failed. | Replacement parts ordered but incorrect due to machine revision. Fix found by rotating gear 180º to unworn section | ~$150 | |
| - | | - | Ryan Marple & Ale Moré | Rise and fall gear/worm totally worn and failed. | Parts were milled, specifically, holes were slotted to allow the installation of a different size worm wheel. | -| | + | | - | Ryan Marple & Ale Moré | Rise and fall gear/worm totally worn and failed. | Parts were milled, specifically, holes were slotted to allow the installation of a different size worm wheel. | - | |
| - | | 14/02/2021 | Ryan Marple & Ale Moré | The stops couldn't be calibrated with ease | Crosscut endstops were modified with an adjustable bullseye | -| | + | | 14/02/2021 | Ryan Marple & Ale Moré | The stops couldn't be calibrated with ease | Crosscut endstops were modified with an adjustable bullseye | - | |
| + | | 15/01/2022 | Ale Moré | Planned maintenance | Change the arbour bearings | | | ||
- tools/woodshop/tablesaws
- Last modified: 2 years ago
- by
ale