leftcr10 - 3dprinters - digitalfabrication

This is an old revision of the document!

Internal Address: http://left-cr10.hsbne.org/ (http://10.0.1.152/)

Maintainers: Drew Spriggs and Jaimyn Mayer

Modifications / Repair History

Date	Modified By	Description	Remediation	Cost
xx/08/2020	Scott and Jaimyn	Swapped the mainboards around on the printers to get them up and running again (mainly Scott).	1hr of time
22/08/2020	Jaimyn	Bed was found to be not level and incorrect filament loaded.	Loaded new roll of PLA and flushed out hotend. Levelled bed by adjusting the screws on each corner.	1hr of time
17/09/2020	Jaimyn	Bed was found to be not level and OctoPrint was offline.	Fixed OctoPrint by reseating all of the power/network cables and changing DNS over to new IP address. Added static IP. Levelled bed by adjusting the screws on each corner.	2hrs of time