AnyCubic Photon

Aliases “Photon”, “AnyCubic Photon”, “The Resin Printer”
Other References
Official Maintainer Aaron Bycroft

Out of Order

THIS MACHINE NEEDS TO BE DOCUMENTED. THE REST OF THIS TEMPLATE HAS NOT BEEN COMPLETED!

This machine requires induction.

The induction process is still in the process of being created. It will cover the following:

  1. Material safety and handling - Resin is a toxic material and needs to be handled with care.
  2. Machine setup and operation
  3. Hot/Cold zone management - Any area where raw resin is handled or processed is considered “hot”. We need to know how to make it “not-hot” or “cold”.
  4. Model preparation - you have an STL you want to print - how to get it processed for the printer to use.

Always wear gloves when handling uncured resin - either liquid or solid form.

Required Gloves are required for handling uncured resin.
Recommended Please wear goggles or a face shield
Recommended We recommend the use of a respirator

PLACEHOLDER: Please fill out this table with all relevant machine specifications. The manufacturers website usually gives a good list. Delete this line.

Name Value
Attribute A 305mm
Attribute B 1600 mm x 270 mm
Attribute C 3.0 hp

PLACEHOLDER: Please copy the two WRAP blocks below for each file you upload relevant to this machine. This should be the manual at a minimum. Delete this line.

PLACEHOLDER: Document the manufacturer, things like contact person names, emails, phone numbers, product urls etc. Document the reseller we bought from, and any other sources for similar things. Delete this line.

Manufacturer

Reseller

  • Mr. Re seller
  • Reseller Agencies
  • E sales@reseller.com
  • M 0000 000 000

Known Identical Models

  • Links to other machines that are a rebrand or similar
Date Description Workaround Proposed Remediation
21/03/2023 UV Light/LCD Screen is broken Use the other Resin printer (White) Replacement LCD Screen / Upgrade to Mono LCD Screen
Date Modified By Description Remediation Cost
01/01/2020 PLACEHOLDER NAME PLACEHOLDER Describe what happened PLACEHOLDER Describe how it was fixed or modified PLACEHOLDER document the cost of the change
Image Category Accessory Name & Notes Location Buy from
PLACEHOLDER Image, 100 width PLACEHOLDER Category of accessory PLACEHOLDER Accessory Name
PLACEHOLDER Description and usage notes for accessory
PLACEHOLDER Describe location of accessory PLACEHOLDER Link to where it was bought from
Image Category Accessory Name & Notes Location Buy from
PLACEHOLDER Image, 100 width PLACEHOLDER Category of consumable PLACEHOLDER Consumable Name
PLACEHOLDER Consumable description and usage
PLACEHOLDER Description of where the consumable is stored PLACEHOLDER Link to where it can be bought
Interval Task
PLACEHOLDER Pick one: Daily/Weekly/Monthly/Quarterly/Biannual/Annual PLACEHOLDER Description of maintenance task and any relevant parameters

PLACEHOLDER A RACI is an important documentation process to let people know what ACTIONS can happen, and who needs to be Responsible, Accountable, Consulted and Informed for each ACTION. Delete this line.

Task / Action Executive Cause Leader
Cause Team
Named Maintainer Trainers Cause Membership Implementer
Modification and Repairs - AC C I I I R
Induction changes C RACI RC I I I R

PLACEHOLDER: Risk assessment is important to ensure we are making tools available to members in a responsible fashion. Please make every effort to do a reasonable risk assessment. If there is a safety incident with the tool, please redo a risk assessment and add it to the table.

Ref / ID Pre-Mitigation Mitigations / Warnings / Remedies Post Mitigation
Risk Risk Severity Risk Likelyhood Risk Level Risk Severity Risk Likelyhood Risk Level Acceptable to Proceed
0001 PLACEHOLDER DEATH Intolerable Probable 11 PLACEHOLDER Induction to train users in correct usage Low Improbable 1

PLACEHOLDER: A decision register is for general documentation when some decision is made regarding the tool. To change its location, mode of operation, to buy an accessory, to replace something, to change how it operates etc. Delete this line.

Ref / ID Decision Details Impact Proposed Date Proposed By Status Approved By Date Resulting Actions and Comments
0000 Example decision Provides an example 08/08/20 JH Approved JH 08/08/20 A line was put in the register
  • tools/digitalfabrication/3dprinters/anycubicphoton
  • Last modified: 14 months ago
  • by bwilkins