Up Mini V1

Aliases Up Mini
Other References
Official Maintainer Brendan Halliday

Not Working

Machine is not working as expected, it has been taken off site to be maintained due to a nozzle clog.

This machine is generally available to use.

Required Enclosed shoes are required, no open sandals, thongs etc
Required These absolutely must be used while removing prints from the printer bed.
Name Value
Printing Area 100x100x100mm


  • Tiertime


  • 3dprintergear
  • 3dprintsuperstore

Known Identical Models

Date Description Workaround Proposed Remediation
Jun 2019 UP! Studio Software generates print jobs that fail after several layers. Use the UP! 2.18 Software instead. Uninstall UP! Studio from PC.
Date Modified By Description Remediation Cost
Jun 2018 Brendan Halliday Nozzle replaced. Old nozzle was clogged with debris that could not be shifted with soaking in ABS. It was binned. $25 AUD
Image Category Accessory Name & Notes Location Buy from
Core Tool Bed Scraper
Bed scraper for removing prints from perfboard.
Side of Machine N/A
Core Tool Bench Hook
Bench Hook for supporting the removed Up Mini perfboard while print is being removed.
Side of Machine N/A
upmini_nozzlewrench.jpg Maintenance tool Nozzle Wrench
Wrench for undoing nozzle. Only to be used by tool maintainer(s). Always make sure nozzle is at extrusion temperature before using.
Side of Machine N/A
Image Category Accessory Name & Notes Location Buy from
Filament Zortrax ABS Filament
Zortrax or UP! Branded ABS Filament
Behind the Up Mini https://www.3dprintergear.com.au/zortrax-black-z-abs-v2-0.8kg
nolink& Printing Surface Up Mini Perfboard
Printing surface for the printer.
Behind the Up Mini https://www.3dprintingsolutions.com.au/Store/Australia/rvdsfpid/perfboard-for-up-3d-printers-85/rvdsfcatid/printing-surfaces-175
Interval Task
Monthly Filament extrusion - to ensure nozzle is clean.
Monthly Bed clean - Scrape the beds clean

Task / Action Executive Cause Leader
Cause Team
Named Maintainer Trainers Cause Membership Implementer
Modification and Repairs - AC RAC I I I R
Induction changes C RACI RC I I I R

Ref / ID Pre-Mitigation Mitigations / Warnings / Remedies Post Mitigation
Risk Risk Severity Risk Likelyhood Risk Level Risk Severity Risk Likelyhood Risk Level Acceptable to Proceed
0001 Fire Tolerable Improbable 4 Induction to train users in correct usage Low Improbable 1
Ref / ID Decision Details Impact Proposed Date Proposed By Status Approved By Date Resulting Actions and Comments
  • tools/digitalfabrication/3dprinters/upmini
  • Last modified: 4 months ago
  • by hsbnewiki