This is an old revision of the document!
This Page in under construction
Please pay close attention, this template provides multiple options and placeholder text. You will need to select the correct option and replace all placeholder text.
Please do not remove entire sections, they're there for a reason.
Delete this box when you are done.
N4400 Bandsaw
The 'space has a Hammer N4400 bandsaw, based in the woodshop.
You need to be inducted on this machine to operate it.
This saw takes a 3976mm blade
| Name | Value |
|---|---|
| Cutting Height | 275mm |
| Rip Capacity | 420mm |
| Rip Capacity with parallel cutting fence | 370mm |
| Saw blade length min | 3950mm |
| Saw blade length max | 4000mm |
| Saw blade min width | 6mm |
| Saw blade speed | 20m/min |
| Wheel diameter | 440mm |
| Table Size | 420x575x950mm |
| Table Tilt | 10º to 22.5º |
| Dust extraction port | 120mm |
Hammer N4400 Bandsaw
| Aliases | Big Bandsaw |
| Other References | |
| Official Maintainer | Ale Moré |
Current Status
PLACEHOLDER: Pick one of these three and delete this line.
Working
Machine is working as expected.
Usage
PLACEHOLDER: Pick one of these three and delete this line.
This machine requires induction to use.
Induction
In order to get inducted on this machine you need to contact the cause leader (Ale Moré on discord) and convene a time to make the induction.
Unofficially we are giving at least one induction per fortnight (commonly there's more than one though) every other Tuesday, from 6pm to 7pm before the table saw assesments.
Guidelines
PLACEHOLDER: This is where you can document the usage practices for the machine generally. If this section gets very long, then it should be part of a canvas course for induction. Don't document maintenance procedures here, please do that below in the maintenance section. Delete this line.
Recommended PPE
PLACEHOLDER: There is a large collection of PPE Icons in the “resources” folder. Please update these two columns with appropriate PPE recommendations. Columns of the tables are “Recommended/Required/Warning/Maintenance”, PPE Icon and Description. Delete this line.
| Recommended |  | We recommend hearing protection. |
| Recommended |  | Please wear goggles or a face shield |
| Recommended |  | We recommend the use of a respirator |
| Required |  | Enclosed shoes are required, no open sandals, thongs etc |
| Warning |  | Gloves are PPE against your material (splinters, resin etc) but are hazardous around the saw. Please carefully evaluate your use of gloves |
| Maintenance |  | Disconnect power to the saw before performing maintenance, including blade changes |
Machine Specifications
PLACEHOLDER: Please fill out this table with all relevant machine specifications. The manufacturers website usually gives a good list. Delete this line.
| Name | Value |
|---|---|
| Attribute A | 305mm |
| Attribute B | 1600 mm x 270 mm |
| Attribute C | 3.0 hp |
Documents
PLACEHOLDER: Please copy the two WRAP blocks below for each file you upload relevant to this machine. This should be the manual at a minimum. Delete this line.
Manufacturer
PLACEHOLDER: Document the manufacturer, things like contact person names, emails, phone numbers, product urls etc. Document the reseller we bought from, and any other sources for similar things. Delete this line.
Manufacturer
- E sales@example.com
- P 00 0000 0000
Reseller
- Mr. Re seller
- Reseller Agencies
- E sales@reseller.com
- M 0000 000 000
Known Identical Models
- Links to other machines that are a rebrand or similar
Known Issues
| Date | Description | Workaround | Proposed Remediation |
|---|---|---|---|
| 01/01/2020 | PLACEHOLDER Describe the problem | PLACEHOLDER Describe the workaround currently in place | Placeholder Describe a proposed fix or solution |
Modifications / Repair History
| Date | Modified By | Description | Remediation | Cost |
|---|---|---|---|---|
| 01/01/2020 | PLACEHOLDER NAME | PLACEHOLDER Describe what happened | PLACEHOLDER Describe how it was fixed or modified | PLACEHOLDER document the cost of the change |
Accessories
| Image | Category | Accessory Name & Notes | Location | Buy from |
|---|---|---|---|---|
| PLACEHOLDER Image, 100 width | PLACEHOLDER Category of accessory | PLACEHOLDER Accessory Name PLACEHOLDER Description and usage notes for accessory | PLACEHOLDER Describe location of accessory | PLACEHOLDER Link to where it was bought from |
Consumables & Running Costs
| Image | Category | Accessory Name & Notes | Location | Buy from |
|---|---|---|---|---|
| PLACEHOLDER Image, 100 width | PLACEHOLDER Category of consumable | PLACEHOLDER Consumable Name PLACEHOLDER Consumable description and usage | PLACEHOLDER Description of where the consumable is stored | PLACEHOLDER Link to where it can be bought |
Maintenance
| Interval | Task |
|---|---|
| PLACEHOLDER Pick one: Daily/Weekly/Monthly/Quarterly/Biannual/Annual | PLACEHOLDER Description of maintenance task and any relevant parameters |
RACI
PLACEHOLDER A RACI is an important documentation process to let people know what ACTIONS can happen, and who needs to be Responsible, Accountable, Consulted and Informed for each ACTION. Delete this line.
| Task / Action | Executive | Cause Leader Cause Team | Named Maintainer | Trainers | Cause | Membership | Implementer |
|---|---|---|---|---|---|---|---|
| Modification and Repairs | - | AC | C | I | I | I | R |
| Induction changes | C | RACI | RC | I | I | I | R |
Risk Matrix and Mitigation
PLACEHOLDER: Risk assessment is important to ensure we are making tools available to members in a responsible fashion. Please make every effort to do a reasonable risk assessment. If there is a safety incident with the tool, please redo a risk assessment and add it to the table.
| Ref / ID | Pre-Mitigation | Mitigations / Warnings / Remedies | Post Mitigation | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Risk | Risk Severity | Risk Likelyhood | Risk Level | Risk Severity | Risk Likelyhood | Risk Level | Acceptable to Proceed | ||
| 0001 | PLACEHOLDER DEATH | Intolerable | Probable | 11 | PLACEHOLDER Induction to train users in correct usage | Low | Improbable | 1 | |
Decision Register
PLACEHOLDER: A decision register is for general documentation when some decision is made regarding the tool. To change its location, mode of operation, to buy an accessory, to replace something, to change how it operates etc. Delete this line.
| Ref / ID | Decision Details | Impact | Proposed Date | Proposed By | Status | Approved By | Date | Resulting Actions and Comments |
|---|---|---|---|---|---|---|---|---|
| 0000 | Example decision | Provides an example | 08/08/20 | JH | Approved | JH | 08/08/20 | A line was put in the register |
- tools/woodshop/bandsaw.1610274338
- Last modified: 3 years ago
- by
duncang