daytona_360pc.jpeg

Daytona D360GRN (D360PS) 360pce Green Mechanical Tool Box Set With 6 Drawer Tool Chest Kit

Aliases “Green Mechanical toolkit”
Other References
Official Maintainer Mechanical team

Working

Toolkit is complete and functional.

This toolkit does not require induction to use.

Please clean the tools after use and place them back in their intended location in the toolkit.

Required Enclosed shoes are required, no open sandals, thongs etc

The Daytona D360PS 360pce Mechanical Tool Set With 6 Drawer Tool Box includes a 360 piece mechanical set with smooth gliding ball bearing drawers, soft grip handle and has also been powder coated which will ensure a longer aesthetic life of the product. This is a must have for all DIY tradies.

Includes:

18pce 1/2“ Drive Imperial Sockets:

  • 5/16”, 3/8“, 7/16”, 15/32“, 1/2”, 9/16“, 19/32”, 5/8“, 11/16”, 3/4“, 25/32”, 13/16“, 7/8”, 15/16“, 1”, 1-1/16“, 1-3/16” &1-1/4“

6pce 3/8” Drive Imperial Sockets:

  • 7/16“, 1/2”, 9/16“, 5/8”, 11/16“ & 3/4”

9pce 1/4“ Drive Imperial Sockets:

  • 3/16”, 7/32“, 1/4”, 9/32“, 5/16”, 11/32“, 3/8”, 7/16“ & 1/2”

3pce 1/2“ Drive Imperial Deep Sockets:

  • 15/16”, 3/4“ & 1”

4pce 3/8“ Drive Imperial Deep Sockets:

  • 7/16”, 1/2“, 9/16” & 5/8“

6pce 1/4” Drive Imperial Deep Sockets:

  • 5/32“, 3/16”, 1/4“, 5/16”, 11/32“ & 3/8”

5pce 1/2“ Drive Metric Deep Sockets:

  • 16mm, 17mm, 18mm, 19mm & 22mm

2pce 1/2” Drive Extension Bars:

  • 125mm & 250mm

1 x 1/2“ Drive Sliding T-Bar Converter 1 x 3/8” Drive 125mm Extension Bar 17pce 1/2“ Drive Metric Sockets:

  • 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 24mm, 27mm, 30mm & 32mm

2pce 1/2” Drive “TX-Star” Sockets:

  • E20 & E24

2pce 1/2“ Drive Metric Spark Plug Sockets:

  • 16mm, 18mm & 21mm

1 x 1/2” Drive Universal Joint 1 x 1/2“ Drive 8mm Bit Hex Coupler 10pce 3/8” Drive Sockets:

  • 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm & 19mm

6pce 3/8“ Drive Deep Wall Sockets:

  • 10mm, 11mm, 12mm, 13mm, 14mm & 15mm

6pce 3/8” Drive “TX-Star” Socket: * E10, E11, E12, E14, E16 & E18 1 x 3/8“ Drive 18mm Spark Plug Socket 1 x 3/8” Drive 8mm Bit Coupler 1 x 3/8“ Drive Universal Joint 13pce 1/4” Drive Metric Sockets:

  • 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm & 14mm

6pce 1/4“ Drive Metric Deep Wall Sockets:

  • 4mm, 5mm, 6mm, 7mm, 8mm & 9mm

5pce 1/4” Drive “TX-STAR” Sockets:

  • E4, E5, E6, E7 & E8

2pce 1/4“ Drive Extension Bars:

  • 50mm & 100mm

1 x 1/4” Drive Spinner Handle 1 x 1/4“ Drive Universal Joint 1 x 1/4” Drive Sliding T-bar 1 x 1/4“ Drive Bit Coupler (6mm) 3pce 108T Ratchet Handles:

  • 1/2”, 3/8“ & 1/4”

7pce Hex Key Wrenches:

  • 1.27mm, 1.5mm, 2mm, 2.5mm, 3mm, 4mm & 5mm

24pce 8mm x 30mm Hex Bits:

  • 5 x Hex: 7mm, 8mm, 10mm, 12mm & 14mm
  • 3 x Slotted: 8mm, 10mm & 12mm
  • 2 x Phillips: PH3 & PH4
  • 2 x Pozi-Drive: PX3 & PX4
  • 6 x Torx: T40, T45, T50, T55, T60 & T70
  • 6 x Security Torx: T40, T45, T50, T55, T60 & T70

30pce x 25(L) Bits:

  • 3 x Phillips: PH1, PH2 & PH3
  • 3 x Slotted: 4, 5.5 & 6.5
  • 3 x Pozi-Drive: PX1, PX2 & PX3
  • 4 x Hex: 3, 4, 5 & 6
  • 3 x Spline: 5, 6 & 8
  • 7 x Torx: T8, T10, T15, T20, T25, T30 & T40
  • 7 x Security Torx: T8, T10, T15, T20, T25, T30 & T40

17pce 1/4“ Drive Metric Bit sockets

  • 4 x Hex: 3mm, 4mm, 5mm & 6mm
  • 2 x Slotted: 5.5mm & 6.5mm
  • 2 x Phillips: PH1 & PH2
  • 2 x Pozi-Drive: PX1 & PX2
  • 7 x Torx: T8, T10, T15, T20, T25, T27 & T30

3 x 180mm Pliers:

  • Combination, Long Nose & Side Cutters

4 x 7” Spring Circlip Pliers 180mm Set:

  • Bent Pliers, Straight Pliers, Internal Pliers & External Pliers

1 x Wrench 1 x Vise Grip 1 x Multi Grip (Plumbers) 1 x 12×1/2“ 24 Tooth Hacksaw 1 x Hickory Wood Hammer 1 x 1 x 5m Tape Measure 1 x Knife 54 Pce 10mm x 30mm Bit & Adapter Set:

  • Torx: T15, T20, T25, T27, T30, T40, T45, T50, T55 & T60
  • Security Torx: T15, T20, T25, T27, T30, T40, T45, T50, T55 & T60
  • Hex: 5/32”, 3/16“, 7/32”, 1/4“, 5/16”, 3/8“, 7/16”, 1/2“ & 9/16”
  • Hex: 4, 5, 6, 7, 8, 10, 12 & 14
  • M5, M6, M8, M10 & M12

10mm x 75mm Bits:

  • Hex: 3/8“, 1/2” & 9/16
  • Hex: 10, 12 & 14

M10 & M12

  • Torx: T50 & T55

1 x 1/2“ Drive 5/16” (8mm) Coupler 1 x 3/8“ Drive 5/16” (8mm) Coupler 4 pce Standard Slotted Tip Screwdrivers:

  • 0.5 x 3.0 x 75mm, 0.8 x 4.0 x 80mm, 1.0 x 5.5 x 100mm & 1.0 x 5.5 x 150mm

4 pce Shealthed/Cabinet Tips:

  • 1.0 x 6.0 x 38mm, 1.0 x 6.0 x 150mm, 1.2 x 8.0 x 200mm & 1.6 x 9.5 x 250mm

6 pce Phillips Tips:

  • PH 0 x 60mm, PH 1 x 38mm, PH 1 x 100mm, PH 2 x 150mm, PH 2 x 200mm & PH 3 x 150mm

6 pce Technicians Screwdrivers:

  • 4 x Slotted: 1.5 x 50mm, 2.0 x 50mm, 2.5 x 50mm & 3.0 x 50mm
  • 1 x Phillips : PH00 x 50mm & PH1 x 50mm

20 pce Imperial & Metric Standard Sockets:

  • 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 19mm, 21mm & 22mm
  • CR-V 1/2“ to 3/8” adapter, 9/16“, 1/2”, 7/16“, 3/8”, 5/16“, 13/16”, 3/4“,11/16” & 5/8“

9 pce Imperial Hex Keys:

  • 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 5/16” & 3/8”

9 pce Metric Hex Keys:

  • 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm & 10mm

11 pce Combination Wrenches:

  • 8mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm & 19mm

9 pce Combination Wrenches:

  • 1/4“, 5/16”, 3/8“, 7/16”, 1/2“, 9/16”, 5/8“, 11/16” & 3/4“

Features:

Includes 3 Large and 3 small drawer tool chest stores 360pce tool kit

Full extension Ball Bearing drawer slides with 34kg loading capacity Chrome plated handle Powder coating finish for chemical/rust resistance Aluminum drawer pulls with end cap to prevent scratches Aluminum handle on top lid Gas struts on top chest for lid opening & close Drawer lock Specifications:

Max loading capacity: 34kg each Drawer dimensions (L x W x H): Top opening: 570mm x 270mm x 45mm Small drawer: 155mm x 250mm x 40mm Large drawer: 550mm x 250mm x 40mm Dimensions (L x W x H): 670mm x 304mm x 371mm Weight: 41kg Warranty:

Lifetime Warranty Covered By Daytona

External Link to toolchest

Sydneytools Virginia External Link 1856-1860 Sandgate Road Virginia 4014 QLD

Phone: 07 3736 5030

Warranty:

Lifetime Warranty Covered By Daytona

Date Description Workaround Proposed Remediation
01/01/2020 PLACEHOLDER Describe the problem PLACEHOLDER Describe the workaround currently in place Placeholder Describe a proposed fix or solution
Date Modified By Description Remediation Cost
01/01/2020 PLACEHOLDER NAME PLACEHOLDER Describe what happened PLACEHOLDER Describe how it was fixed or modified PLACEHOLDER document the cost of the change
Image Category Accessory Name & Notes Location Buy from
PLACEHOLDER Image, 100 width PLACEHOLDER Category of accessory PLACEHOLDER Accessory Name
PLACEHOLDER Description and usage notes for accessory
PLACEHOLDER Describe location of accessory PLACEHOLDER Link to where it was bought from
Image Category Accessory Name & Notes Location Buy from
PLACEHOLDER Image, 100 width PLACEHOLDER Category of consumable PLACEHOLDER Consumable Name
PLACEHOLDER Consumable description and usage
PLACEHOLDER Description of where the consumable is stored PLACEHOLDER Link to where it can be bought
Interval Task
PLACEHOLDER Pick one: Daily/Weekly/Monthly/Quarterly/Biannual/Annual PLACEHOLDER Description of maintenance task and any relevant parameters

PLACEHOLDER A RACI is an important documentation process to let people know what ACTIONS can happen, and who needs to be Responsible, Accountable, Consulted and Informed for each ACTION. Delete this line.

Task / Action Executive Cause Leader
Cause Team
Named Maintainer Trainers Cause Membership Implementer
Modification and Repairs - AC C I I I R
Induction changes C RACI RC I I I R

PLACEHOLDER: Risk assessment is important to ensure we are making tools available to members in a responsible fashion. Please make every effort to do a reasonable risk assessment. If there is a safety incident with the tool, please redo a risk assessment and add it to the table.

Ref / ID Pre-Mitigation Mitigations / Warnings / Remedies Post Mitigation
Risk Risk Severity Risk Likelyhood Risk Level Risk Severity Risk Likelyhood Risk Level Acceptable to Proceed
0001 PLACEHOLDER DEATH Intolerable Probable 11 PLACEHOLDER Induction to train users in correct usage Low Improbable 1

PLACEHOLDER: A decision register is for general documentation when some decision is made regarding the tool. To change its location, mode of operation, to buy an accessory, to replace something, to change how it operates etc. Delete this line.

Ref / ID Decision Details Impact Proposed Date Proposed By Status Approved By Date Resulting Actions and Comments
0000 Example decision Provides an example 08/08/20 JH Approved JH 08/08/20 A line was put in the register
  • tools/mechanical/daytona_360pce_green_mechanical_tool_chest
  • Last modified: 2 weeks ago
  • by raf