This is an old revision of the document!
Aliases | “Bench Grinder” |
Other References | |
Official Maintainer | Craig Rea |
Working
Machine is working as expected.
This machine requires induction to use.
Request an induction in the metalshop channel on the HSBNE discord server, or create a post in the metalworking section of the forums. Inductions typically run on Tuesday nights, but alternative times can be arranged upon request.
Name | Value |
Motor Power | Single Phase, 240V, 750W |
Wheel Size | 200mmx25mm |
Speed | 2850RPM |
Spindle Shaft Thread | M16x2.0 |
Manufacturer
Reseller
Known Identical Models
Date | Description | Workaround | Proposed Remediation |
01/01/2020 | PLACEHOLDER Describe the problem | PLACEHOLDER Describe the workaround currently in place | Placeholder Describe a proposed fix or solution |
Date | Modified By | Description | Remediation | Cost |
01/01/2020 | PLACEHOLDER NAME | PLACEHOLDER Describe what happened | PLACEHOLDER Describe how it was fixed or modified | PLACEHOLDER document the cost of the change |
Image | Category | Accessory Name & Notes | Location | Buy from |
PLACEHOLDER Image, 100 width | PLACEHOLDER Category of accessory | PLACEHOLDER Accessory Name
PLACEHOLDER Description and usage notes for accessory | PLACEHOLDER Describe location of accessory | PLACEHOLDER Link to where it was bought from |
Image | Category | Accessory Name & Notes | Location | Buy from |
PLACEHOLDER Image, 100 width | PLACEHOLDER Category of consumable | PLACEHOLDER Consumable Name
PLACEHOLDER Consumable description and usage | PLACEHOLDER Description of where the consumable is stored | PLACEHOLDER Link to where it can be bought |
Maintenance
Interval | Task |
Monthly | Check and redress wheels |
Task / Action | Executive | Cause Leader
Cause Team | Named Maintainer | Trainers | Cause | Membership | Implementer |
Modification and Repairs | - | AC | C | I | I | I | R |
Induction changes | C | RACI | RC | I | I | I | R |
Risk Matrix and Mitigation
PLACEHOLDER: Risk assessment is important to ensure we are making tools available to members in a responsible fashion. Please make every effort to do a reasonable risk assessment. If there is a safety incident with the tool, please redo a risk assessment and add it to the table.
Ref / ID | Pre-Mitigation | Mitigations / Warnings / Remedies | Post Mitigation |
Risk | Risk Severity | Risk Likelyhood | Risk Level | Risk Severity | Risk Likelyhood | Risk Level | Acceptable to Proceed |
0001 | PROJECTILE | Intolerable | Probable | 8 | Induction to train users in correct usage.
Require use of appropriate PPE. | Low | Possible | 2 | |
0002 | ENTANGLEMENT | Intolerable | Probable | 8 | Induction to train users in correct usage.
Discourage Glove Use | Low | Possible | 2 | |
PLACEHOLDER: A decision register is for general documentation when some decision is made regarding the tool. To change its location, mode of operation, to buy an accessory, to replace something, to change how it operates etc. Delete this line.
Ref / ID | Decision Details | Impact | Proposed Date | Proposed By | Status | Approved By | Date | Resulting Actions and Comments |
0000 | Example decision | Provides an example | 08/08/20 | JH | Approved | JH | 08/08/20 | A line was put in the register |