Welder, MIG - UNIMIG 425 SWF

Aliases “MIG Welder”
Other References

Asset Register

Xero Asset

Portal

Forum Posts

Official Maintainer None

Current Status

Working

Machine is working as expected.

Usage

This machine requires induction to use.

Book an induction in Eventbrite.
https://www.eventbrite.com/cc/metalshop-inductions-804979

Personal Protective Equipment

Required Enclosed shoes are required, no open sandals, thongs etc
Required Wear a welding helmet while welding
Recommended We recommend the use of a respirator when welding fumes are generated
Recommended Wear heat-resistant welding gloves when welding
Recommended Wear flame retardant clothing while welding

Machine Specifications

PLACEHOLDER: Please fill out this table with all relevant machine specifications. The manufacturers website usually gives a good list. Delete this line.

Name Value
Input Voltage 415V
Output Voltage 30 Steps 16-32.5V
Spool Size 5kg/15kg
Wire Size Range 0.6-1.2mm

Documents

Manual

Manufacturer

Manufacturer

Reseller

Known Issues

Date Description Workaround Proposed Remediation
01/01/2020 PLACEHOLDER Describe the problem PLACEHOLDER Describe the workaround currently in place Placeholder Describe a proposed fix or solution

Modifications / Repair History

Date Modified By Description Remediation Cost
01/01/2020 PLACEHOLDER NAME PLACEHOLDER Describe what happened PLACEHOLDER Describe how it was fixed or modified PLACEHOLDER document the cost of the change

Accessories

Image Category Accessory Name & Notes Location Buy from
PLACEHOLDER Image, 100 width PLACEHOLDER Category of accessory PLACEHOLDER Accessory Name
PLACEHOLDER Description and usage notes for accessory 		PLACEHOLDER Describe location of accessory PLACEHOLDER Link to where it was bought from

Consumables & Running Costs

Image Category Accessory Name & Notes Location Buy from
Torch Parts Contact Tips
Contact tips for 0.9mm steel wire 		Stored in MIG Kit Inside Welding Cabinet Hampdon
0.9mm Contact Tips

Maintenance

Interval Task
PLACEHOLDER Pick one: Daily/Weekly/Monthly/Quarterly/Biannual/Annual PLACEHOLDER Description of maintenance task and any relevant parameters

RACI

PLACEHOLDER A RACI is an important documentation process to let people know what ACTIONS can happen, and who needs to be Responsible, Accountable, Consulted and Informed for each ACTION. Delete this line.

Task / Action Executive Cause Leader
Cause Team 		Named Maintainer Trainers Cause Membership Implementer
Modification and Repairs - AC C I I I R
Induction changes C RACI RC I I I R

Risk Matrix and Mitigation

PLACEHOLDER: Risk assessment is important to ensure we are making tools available to members in a responsible fashion. Please make every effort to do a reasonable risk assessment. If there is a safety incident with the tool, please redo a risk assessment and add it to the table.

Ref / ID Pre-Mitigation Mitigations / Warnings / Remedies Post Mitigation
Risk Risk Severity Risk Likelyhood Risk Level Risk Severity Risk Likelyhood Risk Level Acceptable to Proceed
0001 Death Severe Possible 15 Induction to train users in correct usage. Severe Very Unlikely 5 Yes
0002 Electric Shock Major Unlikely 8 Induction to train users in correct usage.
Ensure power cables are properly connected and off the floor.
Cables are tested and tagged and inspected for damage. 		Minor Very Unlikely 2 Yes
0003 Noise Moderate Likely 12 Train users to wear hearing protection. Insignificant Unlikely 2 Yes
0004 Tripping Hazard Moderate Possible 9 Train users to maintain a clean working area.
Keep all cables off the ground and secured out of the way. 		Insignificant Unlikely 2 Yes
0005 Insufficient Lighting Minor Possible 6 Turn on shop lights.
Open metal-shop doors for natural lighting. 		Insignificant Unlikely 2 Yes
0006 Fumes Major Likely 16 Induction to train users in correct usage.
Open metal-shop door to allow ventilation.
Fans are provided top assist in ventilation.
Require appropriate respiratory protection.
Unauthorised access into welding area is prohibited.
Other metal-shop users are informed that welding is in progress. 		Minor Possible 6 Yes
0007 Ejection of Sparks and Materials Major Likely 16 Induction to train users in correct usage.
Require aappropriate welding shield with suitable eye protection is provided and worn.
Screens are provided around the work area and are required to be used.
Unauthorised access into welding area is prohibited.
Other metal-shop users are informed that welding is in progress. 		Minor Possible 6 Yes
0008 Welding Flash / Eye Damage Major Likely 16 Induction to train users in correct usage.
Appropriate welding shield with suitable eye protection is provided and worn.
Screens are provided around the work area and are required to be used.
Unauthorised access into welding area is prohibited.
Other metal-shop users are informed that welding is in progress. 		Minor Possible 6 Yes
0009 Contact with Hot Parts Major Likely 16 Induction to train users in correct usage.
Require use of appropriate PPE.
Suitable how work gloves are provided and required to be worn. 		Minor Unlikely 4 Yes

Decision Register

PLACEHOLDER: A decision register is for general documentation when some decision is made regarding the tool. To change its location, mode of operation, to buy an accessory, to replace something, to change how it operates etc. Delete this line.

Ref / ID Decision Details Impact Proposed Date Proposed By Status Approved By Date Resulting Actions and Comments
0000 Example decision Provides an example 08/08/20 JH Approved JH 08/08/20 A line was put in the register
  • tools/metalshop/welder_mig_425swfwith_uni_mig_kt_50
  • Last modified: 2 years ago
  • by capella_ben